The Biological research of wood and it’s renewable material is what is referred to as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The many Merits of timber and these technologies improve wood to be superior over other products. Some of these advantages include wood being a versatile material that can be used in a wide range of products. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. This protection is from moisture and insects which are the biggest threat to wood. The water particles in the timber increase the rotting and the insects bore through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. As the name implies the preservative is made of copper products. As effective as this preservative, it has some downside to its use. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.
Many methods are being invented to protect the wood, and one of them is the copper metal method. This method, unlike the ACQ, is friendly to the metal fasteners and its gaining popularity very fast. This process is what in other words called the micronized copper wood preservative. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. This process is highly effective and the wood properties and heightened. The wood products protected using this method last longer.
Termites cannot eat through timber treated through this method. It is not corrosive to metals used in together with the product. Extensive research over a period of 10 years has proven the effectiveness of this science as one of the best wood preservation methods.
Support: you could look here